Cutting system of hot sealing and cold cutting bag making machine cutting system is composed of cutter, length regulator, overrunning clutch, welding line adjustment and so on. Double channel even roll vest bag making machine

1, cutter: is an important part of the system, is the use of moving knife and sliding guide, by the spring pressure of the floating mechanism, the upper and lower knife can be adjusted. The adjusting screw is arranged among them, which can be used to adjust the tightness of the cutter, and can well eliminate the phenomenon of raw material difficult to cut.

2. Bag-making length regulator: bag-making length is adjusted by changing the position of the connecting rod sleeve on the eccentric drag plate to control the bag-making length, and the bag-making size is adjusted by the elastic hand wheel and nut.

3. Overrunning clutch: The overrunning clutch is an important part of the machine. Its quality and performance directly affect the error of the length of the product. If errors in bag-making length are found in the production process (generally after continuous production for half a year), and other faults still cannot be solved, the clutch can be disassembled for inspection and maintenance.

4, welding line and cutting line distance adjustment: welding line and cutting line distance is generally 5-10mm, turn the hand wheel on the adjusting frame, so that the beam roller up or down a certain distance, get the ideal cutting line. In order to observe the quality of the welding wire, the position of the single bottom line can be adjusted to the outer end of the machine cutter. If the welding line and the bottom line are not parallel, you can loosen the fixed screw of a bevel gear and turn the handwheel to raise or lower one end of the beam roller; When production is stable, tighten the screws of the gear.

5. Welding knife adjustment method: pad a piece of thin paper on the support seat, turn the big hand wheel in the body box by hand so that the welding knife is at the bottom dead point, loosen the nut and adjust the nut, and try to pull the compression degree of both ends of the thin paper by hand until about equal. After adjustment, the nut should be locked to prevent loosening.

6, automatic light control feeding device: this device is composed of servo motor, feeding cots, light control film masking device, curtain, photoelectric tracking machine and electric control line, its function is to maintain normal film feeding process. When the machine is running, when the film feeding speed is too fast and the light control ray is covered, the device will issue instructions to make the motor stop rotating and feeding.

Ruian Huarui Machinery Co., Ltd. specializes in the production of hot sealing and cold cutting bag making machine, even winding machine, more related products please pay attention to the official website www.luose.com.cn