With the development of The Times, people's requirements for bags are getting higher and higher, the test of our bag making machine manufacturers is getting bigger and bigger, Huarui machinery focus on the production and sales of bag making machine for many years, so to adapt to the development of The Times, we are also constantly upgrading the technology. In particular, the material needs to consume a specific amount of heat in order to ensure proper sealing effect in the bag-making process. In some traditional bag making machines, the sealing shaft will stop in the sealing position during sealing. The speed of the unsealed part will be adjusted according to the machine speed. Intermittent movement causes great stress in mechanical systems and motors, which can shorten their service life. In other non-traditional bag-making machines, the temperature of the sealing head is adjusted whenever the machine speed changes. At higher speeds, the sealing time is shorter, so the temperature increases; At lower speeds, the temperature decreases because the seal lasts longer. When the temperature of the sealing head is set at the new speed, the delay in adjusting the temperature of the sealing head will have a negative impact on the running time of the machine, resulting in the failure to guarantee the sealing quality during the temperature change.

In short, the seal shaft needs to operate at different speeds. In the sealing part, the speed of the shaft is determined by the sealing time; In the unsealed working part, the speed of the shaft is determined by the speed of the machine. Advanced CAM configuration is used to ensure smooth speed switching while significantly reducing stress on the system. Additional instructions are used to generate advanced CAM configurations required for control of the sealed portion (reciprocating motion) based on machine speed and running time. AOI is used to calculate the sealing parameters of virtual host, such as sealing Angle and next segment rate. This, in turn, prompts another AOI to use these parameters to calculate the CAM configuration. Therefore, our upgraded equipment can better solve some problems of many traditional equipment and bring efficient protection for bag manufacturers.

Ruian Huarui Machinery Co., Ltd. specializes in the production of bag making machine, even winding machine, more related products please pay attention to the official website www.luose.com.cn